Resources · HVAC
Which contracts does an HVAC company need?
Every agreement an HVAC company runs on, what each one has to cover, and the clause to get right in each.
01 The short answer
Five sets of contracts, working as one system.
Five sets: customer agreements for installation and service, maintenance contracts that create recurring revenue, subcontractor terms, employment and technician agreements, and the ownership documents between the owners. Each is listed here with what it has to cover and the clause most often missing from it.
- Cooling-off period
- Three business daysContracts of $25 or more signed at the home
- Playbook review
- At least yearlySooner after a dispute or near-miss
- Non-competes
- Effectively bannedCalifornia, Minnesota, Oklahoma, North Dakota
- Contract owner
- One named personA single point of accountability
02 The set
A system, not a pile of templates.
Five groups: customer contracts, workforce contracts, vendor and supplier contracts, ownership contracts, and protective and insurance-related documents. A playbook is these documents working as one system, not a pile of downloaded templates.
| Group | Contract | Key clause to get right |
|---|---|---|
| Customers | Residential service agreement | Specific scope, plus the cancellation notice the law requires |
| Customers | Commercial service contract | Response windows stated in hours, and mutual indemnity |
| Customers | Equipment installation contract | A change order process that needs written authorization |
02 The set · continued
| Group | Contract | Key clause to get right |
|---|---|---|
| Workforce | Employment agreement | Confidentiality and non-solicitation |
| Workforce | Independent contractor agreement | Terms that match how the sub actually works |
| Workforce | Employee handbook | Safety policy and a signed acknowledgment |
| Vendors | Equipment dealer and warranty service agreements | Termination, territory and warranty labor reimbursement |
| Vendors | Supply contract | Delivery terms and supplier indemnity for defective parts |
02 The set · continued
| Group | Contract | Key clause to get right |
|---|---|---|
| Owners | Operating agreement | Exit, death, disability and owner disputes |
| Owners | Buy-sell agreement | Triggering events and how the buyout is valued |
| Protection | Non-disclosure and non-solicitation agreements | Definition of confidential information and a reasonable scope |
| Protection | Additional-insured terms and certificates of insurance | Policy language that matches what the contract promises |
03 Customers
Scope tight enough that nobody can argue.
Residential agreements
Define the scope tightly enough that nobody can argue about what was included. For a maintenance plan, attach the checklist of tasks; for an installation, name the equipment models, the warranty terms and any permits. Set due dates, late fees and your right to stop work for non-payment. State what your warranty covers, for how long, and what voids it: unauthorized modifications, ignoring manufacturer maintenance requirements, and repairs by unlicensed technicians.
Residential contracts also have to follow state consumer protection law. The FTC's Cooling-Off Rule gives a homeowner three business days to cancel a contract of $25 or more signed at the home. If your technicians sell maintenance plans or replacement equipment in the customer's house, the contract has to carry the required cancellation notice. Leaving it out can extend the cancellation period and expose you to penalties. The maintenance plan has its own page: what an HVAC maintenance contract should include.
03 Customers · continued
Commercial contracts
These cover several systems, with an equipment schedule listing each unit by make, model, serial number and location. Write service tiers for emergency, priority and standard calls, with response windows in hours rather than phrases like "prompt response". Cover after-hours and weekend work and what it costs, and how work beyond the visit gets authorized. Keep indemnity mutual so it does not reach the building owner's own negligence, and confirm your insurance limits meet the contract before you sign.
Installation contracts
Add milestones and completion dates, a written change order process, and a clear answer on permits: who pulls them, who pays for inspections, and what happens if the work fails inspection. Adjust time and price if the customer restricts site access. Keep the right to file a mechanic's lien in states where the statute allows it.
When a company has many customers on one set of terms, the framework above them is a master agreement; see master service agreements for home service companies.
04 Workforce
Keep the customers when a technician leaves.
- Employment agreements for every technician, service manager, office employee and salesperson, covering duties, pay structure, benefits, confidentiality, non-solicitation of customers after departure, and invention assignment where staff develop proprietary methods. Confidentiality and non-solicitation matter most, because a departing technician can otherwise leave with your customer relationships and compete the next day.
- Independent contractor agreements for every 1099 sub. The sub supplies its own tools, controls its own schedule, may work for others and is engaged project by project, and carries its own liability and workers' compensation insurance and licenses. HVAC subcontractor agreements walks through the clauses.
- An employee handbook, reviewed by an attorney and acknowledged in writing by each employee, covering workplace safety including OSHA compliance, drug and alcohol rules, vehicle use, appearance, customer conduct, discipline and complaint procedures.
05 Vendors
Read the dealer terms before you sign.
Dealer agreements with manufacturers and distributors set pricing tiers, warranty service authority, territory and volume commitments. Read the termination, territory-change and minimum-purchase terms before signing. If you perform warranty service, check that the reimbursement rate covers your real labor cost, including drive time and diagnostics; manufacturers often set warranty labor below market.
A written supply contract for parts, refrigerants and consumables fixes price, delivery terms and minimum quantities. It should also deal with supply disruption through a force majeure clause, substitute products, your right to buy elsewhere if the vendor fails to deliver, and supplier indemnity and product liability insurance for defective parts that cause damage or injury.
06 Owners
Decide now what happens when an owner leaves.
An LLC needs an operating agreement. It governs ownership, management, distributions and decision-making, and it should answer what happens when an owner wants out, dies or becomes disabled, how owner disputes are settled, and how the company raises capital or borrows. With none, default state LLC statutes decide, and they may not match what the owners intended.
A company with more than one owner also needs a buy-sell agreement. It names the events that trigger a buyout, such as death, disability, retirement, voluntary departure, divorce and bankruptcy, and fixes the valuation method (a set price, a formula or an independent appraisal) and the payment terms. Many companies fund it with life and disability insurance so the remaining owner can complete the purchase without draining operating cash.
07 Protection
Confidentiality, insurance, and a yearly review.
- Non-disclosure agreement. Use a standalone one to share confidential information outside employment or subcontracting: prospective partners and buyers, advisors who see financials, and technology vendors with customer data. See non-disclosure agreements.
- Non-solicitation and non-compete agreements. Non-solicitation terms bar former employees, subs and partners from taking your customers or staff for a stated period; many states enforce them when they are reasonable in scope, duration and geography. Non-competes are restricted or unenforceable in many states, and California, Minnesota, Oklahoma and North Dakota effectively ban them. For most HVAC companies a well-drafted non-solicitation agreement protects more in practice.
- Additional-insured requirements. Commercial building owners, general contractors and manufacturers often require additional-insured status on your general liability policy. Work with your insurance broker so the policy wording supports what your contracts promise; a gap leaves you exposed.
- Certificates of insurance. Collect one from every subcontractor, vendor and supplier before work begins, and verify it with the carrier, since forged certificates are more common than most contractors expect.
07 Protection · continued
Keeping the playbook current
Update it at least once a year, and sooner after a dispute or near-miss. Review it for changes in state and federal law, new service lines, new territories and new customer groups. Give one person accountability for contract management, and run every new customer, subcontractor, vendor and hire through a documented contracting process.
08 When this needs a lawyer
When the paper is behind the business.
- The company runs on proposals and handshakes — with few signed agreements.
- You sell plans or equipment in customers' homes — in more than one state.
- You use 1099 subs — or rely on one sub for much of your install work.
- There is more than one owner — and no buy-sell agreement.
- New terms or a new deal are on the table — a commercial customer or manufacturer is asking for indemnity, insurance or exclusivity terms, or you are preparing to sell, bring in a partner or add a territory.
This is general information, not legal advice. It describes these contracts in general terms and cannot account for your company, your facts or your state. Reading it does not create an attorney–client relationship.
In clients’ words
What clients say.
- ★★★★★Google
“Jeff is extremely good communicating and helping me understand contracts. I think like a twelve year old so I can't say enough great things! I highly recommend him and his team.”
Jason MercerLos Angeles Review - ★★★★★Google
“I had a contract that I did not fully understand, and Jeff Monahan took the time to explain it to me clearly. He also helped revise the language to better reflect my needs and protect my interests. His support made a stressful situation much easier to manage, and I'm grateful for his expertise and guidance.”
steve massLos Angeles Review - ★★★★★Google
“Jeff Monahan at Next Era Legal is an excellent attorney -- he is not only terrific at explaining contracts and making them understandable but also very personable. I look forward to every phone call or zoom with him!”
B.J. MillerLos Angeles Review - ★★★★★Google
“Once again Jeff has proved to be indispensable. I was having trouble with a contract that was created by a slightly unsavory person who helped us fill out VA forms for my mother's care. The person was lying to me saying that I could only…”
Julie Frances HopkinsLos Angeles Review - ★★★★★Google
“Jeff helped with reviewing a contract that was sent to me. I was trying to understand some of the confusing language and what it all meant to make the decision as to whether to sign or not. He gave me guidance on how to interpret some of my concerns and how to request a few changes.”
AlannaLos Angeles Review - ★★★★★Google
“I was looking for a master service agreement for my business. I contacted Next Era Legal and was blown away by the custom drafted and designed contract! Eric put so many personal touches he even included my logo and color pallet. I highly recommend Next Era Legal.”
John SteeleChicago Review - ★★★★★Google
“Jeff and Eric have been an awesome source of support. Professional, sharp, and extremely dependable from start to finish. They continue to give us clear guidance, strong documents, and the confidence that every detail is covered.”
Joe GramSan Diego Review - ★★★★★Google
“I had the pleasure of working with Eric on revising a business contract, and I couldn't be more impressed with the experience. From the start, he was incredibly kind, approachable, and took the time to explain everything clearly. He made…”
Nicole BrewSan Diego Review
Short answers
A minute on business contracts.
Short videos from Next Era Legal on the questions clients ask most. Each one plays here, and the arrows step through the rest.
Watch 8 short videos on business contracts
1:00Fine Print Friday: the two-year employment clause
0:37California Contractor Misclassification Tax Disaster Every Business Must Avoid
0:31Can A Non-Compete Clause Really Stop You From Working Anywhere?
0:29Your Employee Wants To Take Your Customers? Do This First
0:51How We Caught a Costly 1099 Misclassification Disaster Before a Lawsuit
0:55Your job paid you $400k instead of $60k: do you have to give it back?
0:44The Worst Customer Contract Clauses That Could Cost You Big
0:26Are you constantly reviewing your MSA You could be losing sales
Further reading
More on business contracts.
Case studyManaging the DefenseRead the case study
BlogMaster Service Agreements for ContractorsRead the article
BlogHVAC Subcontractor AgreementsRead the article
Also worth reading
09 People also ask
Questions about HVAC contracts.
- 01
Do I need all of these contracts at once?
Not necessarily: start with your largest exposure.
An HVAC company does not have to put every contract in place at once. Next Era Legal's playbook starts with the agreements tied to the largest exposure, usually customer agreements, subcontractor terms and, for companies with several owners, the ownership documents, and then adds the rest in order.
- 02
Is an employee handbook a contract?
Not in the traditional sense, but it is a legal document.
An employee handbook is not a contract in the traditional sense, yet it is still a legal document that sets policy and discipline. A handbook works best when an attorney reviews it and every employee signs to acknowledge it, two steps Next Era Legal builds into its contract playbook for HVAC companies.
- 03
Should I rely on a non-compete?
Often not.
A non-compete is often a weak thing to rely on, because many states restrict these agreements or refuse to enforce them, so the first step is to check your state's position. In Next Era Legal's view, a non-solicitation agreement usually gives an HVAC company better practical protection.
- 04
Who should own contract management inside the company?
One named person.
Contract management inside an HVAC company should belong to a single, named individual. Without a single point of accountability, contracts drift out of date and some relationships end up with no paperwork at all, which is why Next Era Legal's playbook assigns the role to a specific individual.
Los Angeles
Orange County
San Diego
San Francisco
Houston
Metro Detroit
Washington, DC
Miami